歡迎訪問浙江宏輝膠丸有限公司官方網站！
歡迎訪問浙江宏輝膠丸有限公司官方網站！
膠囊印字技術是采用先進的印字設備和卡樂康公司的油墨或獲國家認證的藥用油墨在膠囊表面進行印刷。根據客戶要求可以提供軸環向、定向和雙色印字。外表美觀，字體和圖案清晰可使您的產品形象更突出，增加產品競爭力，提供企業品牌效應。
Capsule printing is the use of advanced printing equipment and Colorcon printing ink or awarded national certification in medicinal capsule surface printing ink. According to customers’ requirements, we can provide circumferential printing, axial printing, specified radial printing and double colour spots printing service, which makes your products’ appearance and font be more well-designed. Meanwhile, it also increases the competitiveness of your products and enhance brand effects.
-存放膠囊的塑料袋需扎緊
-避免陽光直射, 遠離熱源和水源
-膠囊應存放在溫度10°C-25°C, 相對濕度35% - 65%的室內
-膠囊箱與墻和地面保持一定距離, 以便利于空氣流通保持干燥
-如果倉庫與膠囊充填的機房溫濕度相差較大, 則應將膠囊放在與填充條件相近的地方約半天后開箱使用
-輕舀、輕放膠囊，防止造成膠囊癟殼、單節和鎖合等因膠囊處置不當造成的填充缺陷
-請勿使用經手觸摸過的膠囊
-Tighten up the plastic bags with capsules inside
-Avoid direct sunshine, keep away from heat generation and water sources
-Capsules should be stored in the room with the temperature between 10°C and 25°C, and the relative humidity of 35%~65%
-Capsule cartons should be kept away from walls and a certain distance from the floor to avoid moisture
-Capsule cartons should be stored in the place where there is the similar condition with filling room at least half-day before they can be open for filling, in case there are large differences of temperature and humidity between warehouse and filling room
-Scoop out and put down capsules gently to prevent defects of mashes, loose pieces and snap-fit closed etc. to be caused by the improper handling of the capsules
-Do not use capsules which are touched by hands
0575-86176888
